The FB130 (160) R CNC floor-type boring and milling machine is a floor-mounted horizontal ram side-mounted structure. In terms of structural design and manufacturing technology, it has absorbed advanced experience and technology from both domestic and international sources. Following the principles of standardization and modularization, it adopts the most mature component structures available domestically. Utilizing the latest design methods such as 3D design technology (including 3D design software, finite element analysis, etc.), it is a high-end CNC boring machine that has been recently developed. It is suitable for multi-process machining of medium-sized parts, including face milling, boring/drilling, tapping, thread cutting, deep hole drilling with U-drills, turning of outer diameters (with accessories such as steady rests), and machining of three-dimensional surfaces. It can complete multiple processes in a single setup.
The FB130 (160) R CNC floor-type boring and milling machine features a column that moves horizontally back and forth along the bed guide (X-axis); a ram saddle that moves vertically up and down along the column guide (Y-axis); a ram that moves longitudinally back and forth along the ram saddle guide (Z-axis); the machine spindle moves back and forth (W-axis); the worktable moves longitudinally (V-axis); the worktable rotates (B-axis); and the main movement of the machine is the spindle's rotary motion (SP).
The main movements and motion coordinate axes of the machine are as follows:
(1) Main rotary movement of the machine (sp)
(2) Column lateral movement (X coordinate axis)
(3) Ram saddle vertical movement (Y coordinate axis)
(4) Ram longitudinal movement (Z coordinate axis)
(5) Boring bar axial movement (W coordinate axis)
(6) Worktable horizontal travel (V coordinate axis)
(7) Worktable rotation (B coordinate axis)
Main Parameters of the Machine Tool
| Machine Tool Specifications (Main Unit) |
Parameter |
| Boring Bar Diameter |
160 mm (130) |
| Boring Bar Taper |
ISO 50# (7:24) |
| Taper Shank Standard |
DIN 69871 |
| Drawbar Standard |
DIN 69872 |
| Spindle Speed (Infinite Variable) |
10-2000 r/min |
| Maximum Spindle Torque |
3600 N.m |
| Rated Power of Main Motor |
41 kW |
| Transverse Travel (X) |
8000mm (can be increased or decreased) |
| Spindle Box Vertical Travel (Y) |
4000 mm (can be increased or decreased) |
| Ram Travel (Z) |
1200 mm |
| Ram Section Size |
450X450 mm |
| Boring Bar Travel (W) |
800mm |
| Feed Rate Range XYZ/W |
1~5000/3000mm/min |
| Fast Movement X,Y |
10000 mm/min |
| Fast Movement Z,W |
8000mm/min |
| Positioning Accuracy X/YWZ |
0.04/0.025 mm (full range) (VDI/DGQ3441) |
| Repeatability Accuracy X |
0.025mm (full range) (VDI/DGQ3441) |
| Repeatability Accuracy YWZ |
0.020 mm (full range) (VDI/DGQ3441) |
| Numerical Control System (Siemens System as an Example) |
SIEMENS 828D |
| Other Parameters |
|
| Operator Cabin Vertical/Horizontal Travel |
2500/600mm |
| Pressure (Table Clamping) |
8.5 Mpa |
| Compressed Air Source Requirements |
- Pressure: 0.6Mpa
- Output: 18l/sec |
| Power Supply Voltage/Frequency |
3x380/50V/Hz |
| Control Voltage |
24V |
| Total Power Consumption |
86-100 Kva |
| Maximum Feed Force |
- X/Y/Z/W Axis: 40kN |
| Maximum Noise Level "A" |
80dB(A) |
| Machine Tool Total Weight |
Approximately 110 tons |
Audited Supplier 
){kind=link}